Conveyors
Modular Plastic Belt
01 How we build it
Built to spec in Joliet.
- 11 gauge formed stainless steel conveyor frame with stainless steel components.
- Belt set high in frame.
- Intralox Series 900 Flush Grid belt, blue acetal with polypropylene rods.
- Belt supported on stainless steel bars with clip-on UHMW wear strips.
- Belt returned on 1.9” diameter PVC rollers.
- Conveyor frame suspended with stainless steel hanger brackets.
- Floor supported or ceiling hung.
- 230/460V 3 Phase/60 Hz inverter rated SEW Eurodrive motor (575V available).
- Variable belt speed when controlled with variable frequency drive.
- Thermoplastic bearing with stainless steel inserts.
- Stainless steel drive and idler shafts.
- Optional powered plastic belt transfers at each end, for close transfer jumper driven from the left side.
| Guide rails | 1-1/2” high on both sides |
|---|---|
| Optional catch pan | 14-gauge stainless steel hinged design with formed flanges on three sides, heavy duty stainless steel spring latches, pivot and support brackets |
02 Modifications
Modular plastic belt modifications.
Incline Cleated Conveyor
Curve Conveyor
Retracting Conveyor
Nose Bar Conveyor
Pivoting Conveyor
03 Accessories
Modular plastic belt accessories.
