System Technology, Inc. Logo

System Technology, Inc.

Packaging Systems

Contact Us: 815-726-6700

Pallet Conveyor

Features

  • Length: 5’0” overall
  • Width: 52” effective conveying surface - 56” between frame - 59 ¾” overall width
  • Frame: 4” 7ga. formed channel both side - 3”, 7gauge formed channel cross ties
  • Rollers: 2 ½” diameter x 11 gauge zinc flo coat wall, 11/16” hex axles, spring retained, two (2) #40A21 sprockets, grease packed ball bearings
  • Centers: 6”
  • Setting: Rollers are set 1” below the frame.
  • Drive: SEW Euro Drive ½ HP (with low temp oil if freezer application)
  • Speed: 30 F.P.M., variable.
  • Zones: (1) one accumulation zone per bed section.
  • Guards: The tread roller chains are fully enclosed by a #7 gauge scalloped type guard, and the drive chain by a #12 gauge sheet metal guard
  • Supports: Heavy duty, fabricated from 5” 7ga. formed channel legs, 5” x 1.5” x 12ga. channel welded cross ties, adjustable foot, adjustment +/- 1.5”.Supports are spaced on a nominal 5’0” centers
  • Guide Rails: 1-1/2” x 1-1/2” 7ga. angle on side opposite of chain guard.
  • Elevation: 18” top of roller
  • Paint: RAL 7040 including all guarding

REQUEST INFORMATION

System Technology, Inc | 20655 Amherst Court | Joliet, Illinois 60433 | 815.726.6700

System Technology, Inc. Logo